ArcFlash-C(calculations)R(research)T(testing)
ArcFlash-CRT is using two test labs: Aitex (Valencia, Spain) and Kinectrics (Toronto, Canada)
Testing at Aitex
Fabric preparation (wasing to required standards and cutting) is available at Aitex.
International customers (except North America) ship fabric directly to Aitex
ATTN: Mikhail Golovkov
c/o David Calderon
Aitex Textile Researh Institute
Plaza Emilio Sala, 1
E-03801 Alcoy, Spain
PH: +34 96 554 22 20
Customs instructions:
Mark the commercial invoice invoice for a low value and include "For destructive testing ONLY. Samples will be damaged by electric arc and left in Spain."
North American customers ship fabric directly to Aitex at the address above or to ArcFlash-CRT at the address below
Mikhail Golovkov
200 Aqueduct Dr
North Wales, PA 19545
USA
PH: +1-215-390-3205
Testing at Kinectrics
Fabric preparation (wasing to required standards and cutting) is not available at Kinectrics.
International customers (except North America)
If your fabric is prepared (washed to a required standard and cut) ship directly to Kinectrics at address below
ATTN: Mikhail Golovkov
c/o Claude Maurice
Kinectrics Inc.
High Current Lab
800 Kipling Ave Bldg KL
Toronto, Ontario M8Z-6C4
Canada
PH: (416) 207-6305
Mark the commercial invoice invoice for a low value and include "For destructive testing ONLY. Samples will be damaged by electric arc and left in Canada."
If your fabric is not prepared (not washed to a required standard and cut) ship to ArcFlash-CRT at adress below.
Mikhail Golovkov
200 Aqueduct Dr
North Wales, PA 19545
USA
PH: +1-215-390-3205
North American customers
If your fabric is prepared (washed to a required standard and cut) ship directly to Kinectrics or to ArcFlash+CRT
If your fabric is not prepared (not washed to a required standard and cut) ship to ArcFlash-CRT
Print 